Flame Paint Finish for Steel Beams

Fire Paint Finish in colours - to protect Intumescent Steel Paint

Property Repair Systems is OPEN FOR BUSINESS - Free Advice - 01626 872886

speak to real steel fire paint people

Click here for Home Page

 

 

 

 

 

 

   

Coloured Flame Paint Finish - used over Steel Intumescent Paints

Call us first for a Free Calculation and Specification on 01626 872886 , supplied free of charge within one hour, by E Mail or Fax,

(depending on the number of steel sizes submitted )

We supply a Fire Certificate of Supply on completion of the painting.

Trade Price - Price Match Guarantee - we will not be beaten on price. Call us on 01626 872886 for instant help..

Click here to look at the product, check prices and Order in our Fire Paint Shop

Click to see Colour Charts


Choice of Flame Paint Finishes to buy

For a colour finish over Intumescent Paint: Colour Charts

Click here to look at the product, check prices and Order in our Fire Paint Shop


For Steel that will never be exposed to rain or high humidity:

Water Based Vinyl Acrylic Flame Paint Finish - apply 1 coat, or more, according to durability and finish requirements - indoors/outdoors, high/low wear finish required.

For Steel that will be briefly or permanently exposed to rain or high humidity:

Oil Based Flame Paint Finish - apply a minimum of 2 coats, according to durability and finish requirements - indoors/outdoors, high/low wear finish required.

Click here to look at the product, check prices and Order in our Fire Paint Shop


Typical Flame Paint Finish Coverage rates

For a colour finish, including white or black: Colour Charts

Flame Paint Finish - 10 to 12 square metres per litre, about 20-25 square metres per 2.5 litre pack.

Click here to look at the product, check prices and Order in our Fire Paint Shop


Flame Paint Finish Prices, Discounts and Delivery

Prices - call 01626 872886 for full details of pack sizes and prices

Discounts and Trade Sales - call us for details

Delivery - Same day dispatch, various delivery service, UK Mainland.

Trade Price - Price Match Guarantee - we will not be beaten on price. Call us on 01626 872886 for instant help..

Click here to look at the product, check prices and Order in our Fire Paint Shop


Colour Chart: direct link - Click Here. Choose a R.A.L. or B.S. number and name from a chart.

Non-available colours: some luminous, vivid or very bright colours (these cannot all be reproduced in water based or oil based paints). In these cases you can request our special paint additives instead, to mix into your own top coat paint.


Colour Charts

What do RAL and BS mean?

In 1925, the private sector and the German government of that time founded the "Reichsausschuss für Lieferbedingungen" - RAL - (Committee of the German Reich for Terms and Conditions of Sale).

RAL's original task was to standardise precise technical terms of delivery and sale for the purpose of rationalisation. Today, RAL is the recognised competent body for reliable certification of products and services. They introduced Paint Colour Charts in 1927. These now cover over 1900 colours.

B.S. Stands for British Standard, derived from our equivalent - The British Standards Institute (BSI).


Paint Finishes

Flame Paint finish: choose from Matt, Eggshell or Gloss.


Speak to us now for free help and immediate pricing

Call 01626 872886

Call us first for a Free Calculation and Specification on 01626 872886 , supplied free of charge by E Mail or Fax.

Trade Price - Price Match Guarantee - we will not be beaten on price. Call us on 01626 872886 for instant help..

Click here to look at the product, check prices and Order in our Fire Paint Shop


DATA SHEET

Flame Paint Finish

DESCRIPTION AND USE

A range of decorative Flame Retardant paint finishes for use over Intumescent Wall and Ceiling Paint, Intumescent Timber Paint and Intumescent Steel Paint to protect, decorate and complete these fire protection coatings. (You must use one of these Flame Paints to protect your Intumescent Base coats if they are to be visible - Intumescent Paints will not withstand rubbing, abrasion or moisture.)

Flame Paints assist in the control of fire hazards caused by combustible materials such as wood and paint in buildings by releasing an inert, safe flame extinguishing gas upon contact with a fire. Suitable for use direct on bare or sound previously painted non-combustible substrates (e.g. plasterboard, blocks, bricks) and Fire Doors (FD30).

INERT GAS FIRE PROTECTION

When exposed to a fire Flame Paint finish gases to create a fire resilient barrier, protecting the surfaces from the oxygen required to sustain fire.

TO SPECIFY

Prepare and apply Intumescent Wall and Ceiling Paint, Intumescent Timber Paint or Intumescent Steel Paint, and then finish with Flame Paint top coat (s) as a Flame Retardant, according to manufacturer's instructions.

If Flame Paint top coat alone is deemed to provide adequate protection – Class 1:

Apply to ceilings: either 2 coats of Vinyl Matt, or 2 coats of Vinyl Silk.

Apply to walls: 1 coat of Acrylic Undercoat plus 1 coat of Flame Retardant Acrylic Eggshell.

FIRE TESTING

Tested to BS476 Part 7; Class 1 Surface Spread of Flame.

BS476 Part 6; Fire propagation.

Designated Class 0 in accordance with U.K. Building Regulations.

FIRE CERTIFICATION

The Manufacturer will issue a Certificate of Supply upon request for each project for Insurance, Fire and Building Control Authority and Client Records.

FINISH AND COLOUR RANGE

Flame Paint Finish is available in the following decorative finishes:

Gloss, Eggshell, Vinyl Silk, Acrylic Eggshell - all BS and RAL Colours. For a RAL Colour Chart Click Here.

Anti-graffiti system - most BS4800 colours.

Metallic Finishes - steel, gunmetal, rust, silver, gold.

COVERAGE

Gloss, eggshell, acrylic eggshell, vinyl matt and silk - allow 10 to 12m sq. per litre.

Metallic finishes - allow 6 to 7m sq. per litre.

DRYING TIMES

Allow a minimum of 4 hours between Intumescent Base coats, 10 hours before applying a Flame Paint finish coat to the last base coat, 4 hours between water based Flame paint finish coats and 12 hours between Gloss coats of Flame Paint finish. Intumescent paints will not withstand high humidity or rainwater - they must be protected with a fully dried top coat before exposure to the elements.

APPLICATION

Apply in 2 coats by brush or roller or spray.

Airless spray – Graco 1500 or 5000 with 0.015" tip.

Pressure pot – Devilbiss J.G.A 502 gun, 402-FF needle, 705 aircap, FF nozzle.

Ensure surfaces are clean, dry and sound. Minimum application temperature 6°C. Do not apply when condensation may form. Thoroughly abrade old gloss or eggshell paints.

QUALITY ASSURANCE

Fire Paint is manufactured under the principles of BS 5750/ISO 9000

COMPOSITION

Antimony Oxide flame retardant agents. Acrylic, Alkyd and Vinyl binders.

High opacity pigments (metallic finish contains inert acrylic resins and metal powders.)

ENVIRONMENTAL HEALTH & SAFETY

Intumescent and Flame Paints are made within a low odour, water-based system, thus making them user and environmentally friendly.


Call us first for a Free Calculation and Specification on 01626 872886 , supplied free of charge by E Mail or Fax.

We supply a Fire Certificate of Supply on completion of the painting.

Trade Price - Price Match Guarantee - we will not be beaten on price. Call us on 01626 872886 for instant help..

Click here to look at the product, check prices and Order in our Fire Paint Shop



 

Working hard Logo - Property Repair Systems

Property Repair Systems

TEL: 01626 872886

E: help@propertyrepairsystems.co.uk


Site written by: David Moore

David Moore, B.A. (Hons.), C.T.I.S., C.R.D.S. Technical Author

Google+


Other Property Repair Systems Sites
 

www.drywallandfloor.co.uk - membranes for lining damp walls, floors, basements and cellars

www.epoxy-info.co.uk - epoxy resins for repairing wood, concrete, brick and stone

www.fire-door-paint.co.uk - upgrade doors to 30 minutes fire resistance

www.joist-repair.co.uk - how to quickly repair joists and beams of any size

www.propertyrepairsystems.co.uk - our Home Site

www.timber.org.uk - systems of repair, with step by step methods

www.timber-repair.co.uk - how to repair timber beams


 

Default Statcounter code for Steel-Fire-Paint https://www.steel-fire-paint.co.uk/index.html -->